Looking for help with array and randomness

pianofire

I have re-shared the program with the shuffle routine added called "Card Shuffle"

rdurbin

What ill generally do for card games is have 2 arrays. Array 1 has the card #(1-52). array 2 controls if number has not been used. I default array 2 to all 1s(true). start off with a random #. say 11 is drawn. Set array2[11] to 0 and set array1[1] to 11. Now for future cards. Do the random # again. Lets say you get 15. Set array2[15] to 0 and array1[2] to 15. Now lets say 11 gets picked again. You check if array2[11]=1. Which is untrue. What i do from here is just increment the random # til it finds one that can be used. Basicially repeat this for each drawn card. Now you need to make it loop around so if the checks get to 52. It will loop around to 1. Its actually easier than it sounds. This can all be accomplished with arrays,if,while statements.

array deck[53]//1-52
array used[53]//1-52

for z=1 to 53 loop
     used[z]=1//makes all cards usable
repeat

for z=1 to 53 loop
     a=int(rnd(1)*52+1)

     while used[a]!=1 loop//makes sure not used
          a+=1//increments rand num
          if a>52 then
               a=0
          endif
     repeat

     used[a]=0//sets number as used
     deck[z]=a//places card in deck
repeat

kendog400

I think I forgot to put this in a function :
Take a Peek (rdurbin)

card = createsprite ()
deck = loadimage ("Kenneyboardgames")
tiles = numtiles (deck)
setspritelocation(card, 0,67)
tile = 15 // start at 2 of clubs

// here's where I should put the function....
function deck & shuffle ()
array deck [53]
array used [53]

for z = 1 to 53 loop
    used [z] = 1
repeat

for z = 1 to 53 loop
    a += (rnd (1) + 52 + 1)  
       while used [a] !     // it is here the error msg says Fx not available
          a += 1
if a > 52 then 
    a = 0
  endif
repeat

used [a] = 0
  deck [z]
repeat

loop
   clear (darkGreen)
     c = controls (0)
     if c.y and tile > 0 then
         tile -= 1
    endif
    if c.a and tile < tiles -1 then
       tiles + = 1
    endif
    setspritescale (card, 3, 3)
    setspriteframe (card,tile)
    if tile > 67 then tile = 15
    drawsprites ()
update ()
repeat

rdurbin

while used [a] ! // it is here the error msg says Fx not

In while loop its needs to be !=1. 1 means its not used yet, 0 used

You should be able to also use

while !(used[a]) loop

I would also place the function after main loop but call it before main loop. Best to divide individual tasks into functions. Easier to read and understand

Jonboy

I think this should be:

while !used[a] loop

meaning keep looping while used[a] is equal to 0

Unless i've missed something, which is entirely possible!

Personally for legibility i would use:

while used[a] == false loop

Purely force of habit so i do get told off sometimes by the youngsters!

kendog400

OK, thanks, I finally got that PGM working. But I have another question : I have here a program that displays cards, along the "X" axis, then after 13 cards it moves down the "Y" axis to start another row, but every time it displays a card, the previous card disappears, I'm trying to figure out how to make the previous card stay on the screen. I would like to get all 52 cards on the screen....I tried to setSpriteVisibility (card, true), but nothing seems to work, Heres a example of the program :

//..................................................................
card = createsprite ( )
deck = loadImage ("Kenneyboardgames")
tiles = numtiles (deck)
setspriteimage (card, deck)
x = 150
y = 200
setspritelocation (card, x, y)
setspriteanimation (card, 0, 64)
tile = 15
loop
  clear (darkGreen)
  c = controls (0)
  if c.a and tile < tiles -1 then
    tile += 1    
setspriteanimation (card, 0, 67)
  x = x += 80                           // move along the "x" axis
  setspritelocation (card, x, y)
    if x > gwidth() - 180 then    // once you go 13 cards across
      x = 70
      y = y += 100                     // move down the "y" axis to start a new row
        endif                               // end the 2nd if statment
updatesprites ( )
drawsprites ( )
update  ( )
endif                                       // end the 1st if statment
setspriteschale (card, 1.5, 1.5)
setspriteanimframe (card, tile)

// at this next line I would like to end the program with the end ( ) function, instead it goes back to the beginning...
  if tile > 67 then tile = 15 
    endif
  if tile == 54 then
    tile += 1                      // skip the joker
      endif
drawsprites ( )
update ( )
repeat                             // end of program....
//...........................................................

// here i have an example of an end Function....It worked with other Programs, but not this one....
function end ( )
  clear(lime)
  drawtext (120, 250, 180, black, "End of Deck")
  update()
  sleep(3)
return void

kendog400

Does Fuze have a Drop Shadow effect, like Photoshop ? (Just wondering)

pianofire

@kendog400 Your program only has a single sprite. When you change the animation and location of that sprite it just moves and changes that single sprite. If you are going to use sprites you need to have a sprite for each card in the pack. The easiest way to do that is to use an array of sprites. I have shared an example of this.

The end function will not terminate your program it will just be called every time around the game loop. Instead you need to make your game loop conditional. Something like

finished = false
while !finished loop
  // set finished = true to end program
repeat

clear(lime)
drawtext (120, 250, 180, black, "End of Deck")
update()
sleep(3)

kendog400

OK, thanks, I'LL try this to see if I could get the program to end after the deck of cards is used up...

kendog400

As for a drop shadow effect, mabey i could put a rectangle under the sprite, re-set the opacity, then add a blur... (?)

kendog400

I tried, but it seems I dont know exactly where to put the while loop......I tried to replace the for loop with the command while....It must be some sloppiness on my part.....could you give me a hint ?......

pianofire

@kendog400 Sorry very busy at the moment. I will take a look on Wednesday

Dave

@kendog400 My friend code is 5139-4176-1902

Please add me as a Nintendo friend, share your project and I'll take a look today if I can!

pianofire

@kendog400 OK I think that it is worth you looking at the 3 main different types of loop in Fuze: https://fuzearena.com/help/view/loop

Infinite (loop ... repeat) - this doesn't end until it is interrupted (as in your program)
Conditional (while condition loop ... repeat) - ends when the condition is met (e.g. the game has finished)
For (for index = start to end loop ... repeat) - ends when index > end

You wouldn't normally use 1) as it can only be ended by stopping the program.
You would use 2) when you want something to carry on until something happens
You would use 3) when you have a fixed amount of work to do

In your example you could use 3) because you have a fixed amount of work - you deal the cards and then your program finishes.

In reality your program will probably want to do something else after dealing the cards so you would have loops inside loops

Here is an example of a simple game loop (and possibly the worlds dullest game)

finished = false

while !finished loop
  gameScreen()
  endScreen()   
repeat

function gameScreen()
  c = controls(0)
  while !c.a loop
    clear()
    c = controls(0)
    printAt(0, 0, "Game Screen. Press A to exit")  
    update()
  repeat
return void

function endScreen()
  c = controls(0)
  while !c.x and !c.y loop
    clear()
    c = controls(0)
    printAt(0, 0, "End Screen. Press Y to play again and X to exit")  
    update()
  repeat
  finished = c.x
return void

QIsLegit

@pianofire
Is there no way to break out of an 'infinite loop' using code?

pianofire

@QIsLegit OK yes there is. You can use the break command but it is not good practice https://fuzearena.com/help/view/break

loop
  c = controls(0)
  if c.a then
    break
  endif
  update()
repeat